Composite Fencing End Post Set

Composite Fencing End Post Set

Finish the final end of your composite fencing run with a clean, fully matched post set. This end post set includes a composite outer sleeve and a galvanised steel inner post, both in your choice of colour to match your fence panels perfectly. The same solid dual-post construction used in the panel set, sold separately so you can close off your run without buying a full panel set.

What Is Included

• 1 x Composite post (1.8 m, choice of Anthracite or Dark Teak)
• 1 x Post top cap (matching colour)
• 1 x Post bottom cap (matching colour)
• 1 x Galvanised steel post (1.8 m, with base plate)
• 4 x Expansion screws (for bolt-down installation on concrete)

Post Construction

Each post set uses the same dual-layer construction as the panel sets. The galvanised steel post provides structural strength and rigidity, while the composite outer sleeve gives a seamless colour-matched finish that coordinates with your fence slats throughout.

The composite sleeve slides over the steel post and locks in place, giving a clean finish from every angle. Posts feature channels on all four sides, making them equally suitable as a corner, middle, or end post.

Post Fixing Options

• Option 1, In-ground: Bury the steel post 6 cm below ground level and set in concrete for a permanent, solid fix.
• Option 2, On concrete: Leave the post above ground and bolt down using the 4 included expansion screws. Suitable for existing concrete or paved surfaces.

Dimensions

• Composite post height: 1,800 mm (1.8 m)
• Steel post height: 1,800 mm (1.8 m)

Colour Options

• Anthracite - matches the Composite Fencing Panel Set Anthracite
• Dark Teak - matches the Composite Fencing Panel Set Dark Teak

Select your colour from the options above to ensure a perfect match with your existing fence panels. One end post set is required to close the final end of every fencing run.